Emerson iCOM Spare Part List-Large Display Only, Setpoints parameters, Event log parameters

User Menu Parameters

7.0USER MENU PARAMETERS

°C / °F

%RH SET

User menus report general cooling unit operations and status. The password for the user menu is 1490.

The iCOM control firmware is being updated constantly. As a result, the User menu parameter tables in this manual may be slightly different than what is shown on your cooling unit's display. Please check www.liebert.com for the latest iCOM User manual updates.

Table 12 Setpoints parameters

Function		Read/	Range
Large Display	Small Display	Write	Imperial (metric)
Page 1 of 1
Password	PASSWORD	W	-
Temperature Setpoint	TEMP SET	W	41-104°F (5-40°C)
			20-80%
Humidity Setpoint	HUM SET	W	(settings lower than 19%
			will be forced to 20)
Humidity Control Type	HUM CTRL	W	Relative, Compensated,
			Predictive
Supply Limit	SUP LIM	W	Enabled, Disabled
Supply Limit Temp Value	SUP TEMP	W	41-77°F (5-25°C)
Backup Temperature	BACK TPS	W	41-104°F (5-40°C)
Setpoint

EVENT

LOG

Spare Part List—Large Display Only

Displays the various Liebert part numbers for all parts in the cooling unit to simplify ordering replacement parts.

Table 13 Spare part list parameters—large display only

	Function		Read/	Range
Large Display		Small Display	Write	Imperial (metric)
Page 1 of 1
List of parts		N/A	R	-

Table 14 Event log parameters

	Function		Read/	Range
Large Display		Small Display	Write	Imperial (metric)
Page 1 of 1
Last 400 events		Last 400 events	R	-

Table 15 View network parameters—large display only*

	Function		Read/	Range
Large Display		Small Display	Write	Imperial (metric)
Page 1 of 1
				AlarmOff, Manual, LocalOff, SystemOff,
Status Unit 1—32		N/A	R	AlarmStandby, Standby, TimerOff,
				SystemOn, WarningOn, AlarmOn, Timer

* Permits viewing all units connected in a network. Viewable on a large display only.

51