Emerson iCOM user manual Sensor calibration / setup parameters

Service Menu Parameters

SET

ALARMS

+ / -

Table 28 Set alarms parameters (continued)

Function		Read/	Range
Large Display	Small Display	Write	Imperial (metric)
TYPE	-	-	-
COMP 1 SHORT CYCLE	SC1	W	MSG, WRN, ALM
COMP 2 SHORT CYCLE	SC2	W	MSG, WRN, ALM
NO POWER	NOP	W	MSG, WRN, ALM
CONDENSER 1 FAILURE	CN1	W	MSG, WRN, ALM
CONDENSER 2 FAILURE	CN2	W	MSG, WRN, ALM
-	-	-	-
-	-	-	-
-	-	-	-
-	-	-	-
-	-	-	-
-	-	-	-

Table 29 Sensor calibration / setup parameters

Function		Read/	Range
Large Display	Small Display	Write	Imperial (metric)
Page 1 of 3
Password	PASSWORD	W	-
Return Temperature	RTN TEMP	W	±18°F (±9.9°C)
Calibrated Return Temperature	CAL TEMP	R	32-122°F (0-50°C)
Return Humidity	RTN HUM	W	±9.9%
Calibrated Return Humidity	CAL HUM	R	20-80%
Digiscroll 1 NTC	DS1 NTC	W	±18°F (±9.9°C)
Calibrated Digiscroll 1 NTC	CAL DS1	R	84-313°F (29-156°C)
Digiscroll 2 NTC	DS2 NTC	W	±18°F (±9.9°C)
Calibrated Digiscroll 2 NTC	CAL DS2	R	84-313°F (29-156°C)
Page 2 of 3
Password	PASSWORD	W	-
Temperature Sensor A	TEMP A	W	±18°F (±9.9°C)
Calibrated Temperature Sensor A	CAL A	R	32-122°F (0-50°C)
Humidity Sensor A	HUM A	W	±9.9%
Calibrated Humidity Sensor A	CAL A	R	20-80%
Temperature Sensor B	TEMP B	W	±18°F (±9.9°C)
Calibrated Temperature Sensor B	CAL B	R	32-122°F (0-50°C)
Humidity Sensor B	HUM B	W	±9.9%
Calibrated Humidity Sensor B	CAL B	R	20-80%
Page 3 of 3
Password	PASSWORD	W	-

69