Emerson iCOM user manual 7of

Service Menu Parameters

Table 27 Diagnostics / service mode parameters (continued)

	Function		Read/	Range
	Large Display	Small Display	Write	Imperial (metric)
SERVICE	Page 7of 7
	Status Humidifier Problem	HUM PROB	R	OK, Act
	Status DT1 (Outdoor/Glycol)	DT1	R	OK, Act
	Status DT2 (Glycol/Room)	DT2	R	OK, Act
	Status DT3 (Room/Setpoint)	DT3	R	OK, Act
	Status Min CW	MIN CW	R	OK, Act
	LWD Value	LWD Val	R	Off, On
	Status LSI	LSI	R	Off, On

SET

ALARMS

Table 28 Set alarms parameters

Function		Read/	Range
Large Display	Small Display	Write	Imperial (metric)
Page 1 of 7
Password	PASSWORD	W	-
Return Sensor Alarms	RTN SNSR	W	Disabled, Enabled
High Return Temperature	HI TEMP	W	34-210°F (1-99°C)
Low Return Temperature	LO TEMP	W	34-210°F (1-99°C)
High Return Humidity	HI HUM	W	1-99%
Low Return Humidity	LOW HUM	W	1-99%
Sensor A Alarms	SENSOR A	W	Disabled, Enabled
High Temperature Sensor A	HI TEMPA	W	34-210°F (1-99°C)
Low Temperature Sensor A	LO TEMPA	W	34-210°F (1-99°C)
High Humidity Sensor A	HI HUM A	W	1-99%
Low Humidity Sensor A	LO HUM A	W	1-99%

63