Emerson Process Management rosemount 3300 series manual 0RXQWLQJLQ6WLOO SLSHVE\SDVVSLSHV

			5HIHUHQFH￿0DQXDO
Still Pipes.	￿￿￿￿￿￿4￿￿￿￿￿	￿￿￿￿￿￿(￿￿￿	00809-0100-4811, Rev AA
			￿￿￿￿￿￿(￿￿￿￿!￿￿￿￿
Rosemount 3300 Series			October 2002
0RXQWLQJ￿LQ￿6WLOO￿
SLSHV￿E\￿SDVV￿SLSHV
Figure 3-4. Mounting in
			Pipe diameter Ø≥2 inch (50 mm).
RSL			Inlet pipe diameter N<Ø.
	￿!	!￿	L≥12 inch (300 mm).
_
MOUNT	A	A	The center rod must be placed more than
PIPE	￿￿￿￿￿;￿￿￿4￿￿￿￿￿	￿￿￿￿￿;￿￿￿(￿￿￿	0.6￿￿￿￿￿￿4￿￿￿￿￿￿!￿￿￿￿inch/15 mm away from the pipe wall.
RTL/STILL			Pipe diameter Ø≥1 inch (25 mm).
			Inlet pipe diameter N<Ø.
MOUNT_			L≥12 inch (300 mm).
			Make sure that the probe is at the center of
PIPE			the￿￿￿￿@Still pipe.
STILL_
			It is not recommended that flexible
			probes￿￿￿￿￿;￿￿￿(￿￿￿￿!￿￿￿￿are installed in by-pass pipes.
FSL			Pipe diameter Ø≥3 inch (75 mm).
MOUNT	A	A	The center rod must be placed more than
PIPE			0.6 inch/15 mm away from the pipe wall. The
			probe may under no circumstances get into
FTL/STILL			contact￿￿￿￿￿;￿￿￿4￿￿￿￿￿￿!￿￿￿￿with the pipe wall.
			Pipe diameter Ø≥3 inch (75 mm).
MOUNT_
			Make sure that the probe is at the center of
PIPE			￿￿￿￿￿￿￿￿!￿￿￿￿the Still pipe.
STILL
			Pipe diameter Ø≥1.5 inch (38 mm).
CL		A
STILL PIPE MOUNT
3-8