Emerson Process Management rosemount 3300 series manual 92/80 &21,*85$7,21, 7DQN7\SH

5HIHUHQFH￿0DQXDO￿

00809-0100-4811, Rev AA October 2002

Rosemount 3300 Series

92/80(￿ &21),*85$7,21

7UDQVPLWWHU￿9DULDEOHV

%￿￿(￿￿￿￿￿%￿￿(￿￿￿￿￿ 1, 1, 1, 1

9ROXPH 8QLWV

1, 3, 2, 2

Select the Volume option in order to configure the transmitter for volume measurements.

Choose one of the following units:

•Gallons

•Liters

•Imperial Gallons

•Cubic Meters

•Barrels

•Cubic Yards

•Cubic Feet

•Cubic Inch

7DQN￿7\SH

%￿￿(￿￿￿￿￿%￿￿(￿￿￿￿￿ 1, 4, 3, 1

Choose a standard tank shape, or select the strapping option. Standard shapes are: Vertical Cylinder, Horizontal Cylinder, Vertical Bullet, Horizontal Bullet or Sphere. (If Primary Variable is Level choose None for Tank Type).

If your tank does not correspond to any of the above tank shapes, select Strap Table.

7DQN￿'LPHQVLRQV

%￿￿(￿￿￿￿￿ 1, 4, 3, 2

6WUDSSLQJ 7DEOH

1, 4, 3, 4

If a standard tank type was chosen, enter the diameter and height of the tank. See “Volume Configuration” on page 4-5for information on how to specify tank dimensions.

If tank type Strapping Table was chosen, enter how many entries you will use and the actual level and volume points. You can enter from 2 to 10 points. The strapping points must be entered such that the first point corresponds to the lowest level, and the last point corresponds to the topmost level of the tank.

4-13