Rosemount 3300 Series
5HIHUHQFH0DQXDO
00809-0100-4811, Rev AA October 2002
Figure C-5. Data Entry Key Sequence
0(186$1' )81&7,216
For example, to enter the letter R, first press the right Shift key, then the “6” key (see Figure
345
The HART Communicator is a menu driven system. Each screen provides a menu of options that can be selected or provides direction for input of data, warnings, messages, or other instructions.
0DLQ0HQX
When the HART Communicator is turned on, one of two menus appears: the Online Menu or the Main Menu.
If the HART Communicator is connected to an operating loop, the communicator finds the device and displays the Online Menu.
If it is not connected to a loop, the communicator indicates that no device was found. When you press OK (F4), it displays the Main Menu.
The Main Menu provides the following options:
•2IIOLQH – The Offline option provides access to offline configuration data and simulation functions.
•2QOLQH– The Online option checks for a device and if it finds one, brings up the Online Menu. Online communication with the 3300 Series Transmitter automatically loads the current gauge data to the HART Communicator.
•7UDQVIHU– The Transfer option provides access to options for transferring data either from the HART Communicator (memory) to the 3300 Series Transmitter (device) or vice versa. Transfer is used to move offline data from the HART Communicator to the gauge, or to retrieve data from a gauge for offline revision.
•)UHTXHQF\'HYLFH– The Frequency Device option displays the frequency output and corresponding pressure output of
•8WLOLW\– The Utility option provides access to the contrast control for the HART Communicator LCD screen and to the autopoll setting used in multidrop applications.
To select an option from the menu, you can use the up and down arrow keys and the select (right arrow) key or you can simply press
the corresponding number on the alphanumeric keypad to “fast select” the option.
