Emerson Process Management rosemount 3300 series For adapters with BSP/G threads, place, Tank

5HIHUHQFH￿0DQXDO￿

00809-0100-4811, Rev AA October 2002

Rosemount 3300 Series

0(&+$1,&$/￿ ,167$//$7,21

Figure (￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿3-7. Tank connection￿￿￿ with flange.

FLANGE	3￿￿￿5￿￿￿
TRANSMITTER MOUNT

Mount the transmitter with flange on a nozzle on top of the tank. The transmitter can also be mounted on a threaded connection. Make sure only qualified personnel perform the installation.

127(

If you need to remove the transmitter head from the probe, make sure that the Process Seal is carefully protected from dust and water. See 6HFWLRQ ￿￿￿

6HUYLFH for further information.

￿￿;￿	1.	Place a gasket on top of the tank flange.
	2.	Lower the transmitter and probe with
		flange into the tank.
	3.	Tighten the bolts.
	4.	Loosen the nut that connects the
	5.	transmitter housing to the probe slightly.
.		Rotate the transmitter housing so the
		cable entries/display face the desired
		direction.
(￿￿￿￿￿￿￿￿￿￿	6.	Tighten the nut.

Figure 3-8. Threaded tank

connection. ￿￿￿￿￿￿
THREAD	￿￿;￿
TRANSMITTER MOUNT

￿￿￿		1.	For adapters with BSP/G threads, place
			a gasket on top of the tank flange.
		2.	Lower the transmitter and probe into the
			tank.
		3.	Screw the adapter into the process
			connection.
.￿￿￿￿￿		4.	Loosen the nut that connects the
		5.	transmitter housing to the probe slightly.
7￿￿￿34￿	￿7.8￿￿￿￿￿￿￿￿8		Rotate the transmitter housing so the
			cable entries/display face the desired
			direction.
		6.	Tighten the nut.

3-11