Emerson Process Management rosemount 3300 series manual KDQJLQJWKH3UREH

5HIHUHQFH￿0DQXDO￿

00809-0100-4811, Rev AA October 2002

Rosemount 3300 Series

&KDQJLQJ￿WKH￿3UREH

PROBE CHANGE FL/PROBE CHANGE THREAD

7UDQVPLWWHU￿			1.	Loosen the nut.
	KHDG
			2.	Remove the old probe from the
				transmitter head and mount the
	1XW			new probe.
		3.		Fasten the nut again.

4.If the new probe is not of the same type as the original probe, update the transmitter configuration by setting the Probe Type parameter to the appropriate value:

HART Fast Key sequence [1, 3, 6], or

RCT Setup/Tank Config.

5.Measure the probe length and enter the measured value: HART Fast Key sequence [1, 3, 5],

or

RCT Setup/Tank Config.

6.Verify that the transmitter is calibrated.

127(

Flexible and Rigid probes require different radar electronics and can not be used with the same transmitter head.

6-11