VLAN Redirect Configuration Screen
Chassis Menu Screens 4-25
Destination Module
(Read-Only)
See which modules are currently set as destination modules.
Destination Port
(Read-Only)
See which ports are currently set as destination ports. Multiple
VLAN IDs may be assigned to a destination port.
Frame Format
(Read-Only)
Display the current frame format setting: RECEIVED, TAGGED, or
UNTAGGED. The default is RECEIVED.
RECEIVED – Frames are redirected in the format that they were
received by the switch module.
TAGGED – Frames are transmitted on the destination port with a
VLAN tag inserted according to the frame classification of the
receiving port.
UNTAGGED – Frames are transmitted on the destination port
without a VLAN tag regardless of the format of the received frame.
NOTE: See Section 4.9.1 to change the settings in the following fields.
Src VLAN ID [n]
(Modifiable)
Enter the VLAN ID of the VLAN that is to be redirected to a port. A
VLAN can not be redirected to more than one port at a time.
Src Module [n]
(Selectable)
Select the module [n] that is to be changed to a source module.
Dest Port [n]
(Selectable)
Select the port [n] that is to be changed to a destination port. If a port is
currently being redirected, it will not display as a selectable port.
Dest Module [n]
(Selectable)
Select the module [n] that is to be changed to a destination module.
Frame Format
(Selectable)
Select the frame format for the transmission of redirected frames on the
destination port. RECEIVED, TAGGED, or UNTAGGED may be
selected. Refer to the previously described read-only Frame Format
field for details about each format. The default setting is RECEIVED.
Redirect Errors Unsupported (only valid frames can be classified into a VLAN).
Status
(Toggle)
Add or delete source and destination ports selected in the Source
VLAN [n] and Destination Port [n] fields.
Table 4-9 VLAN Redirect Configuration Screen Field Descriptions (Continued)
Use this field… To…