Enterasys Networks 6E2xx, 6G3xx, 6H2xx, 6H3xx 3.4.1 Selecting a Module

Module Selection Screen
Accessing Local Management 3-11
Field Descriptions
Refer to Table 3 -2 for a functional description of each screen field.
3.4.1 Selecting a Module
To select an individual module to perform Local Management functions, proceed as follows:
1. Use the arrow keys to highlight the desired module number in the Module # field.
2. Press ENTER, the applicable Module Menu screen displays. Proceed to Section 3.5.
Table 3-2 Module Selection Screen Field Descriptions
Use this field… To…
Module #
(Selectable)
Display the slot in which the module is installed. The module number
enclosed in angle brackets (< >) indicates the module to which the
management terminal or Telnet session is currently connected.
Module Type
(Read-Only)
Display the type of interface module that is installed in each slot.
Serial #
(Read-Only)
Display the serial number of the module. The serial number of the
device is necessary when calling Enterasys Networks concerning the
module.
Hardware Revision
(Read-only)
Display the hardware version of the module.