Enterasys Networks 6E2xx, 6G3xx, 6H2xx, 6H3xx 7.3 SPANNING TREE CONFIGURATION SCREEN

Spanning Tree Configuration Screen
7-6 802.1 Configuration Menu Screens
7.3 SPANNING TREE CONFIGURATION SCREEN
When to Use
To create a separate Spanning Tree topology for each VLAN configured in the switch module.
Also provides access to the PVST Configuration screen.
How to Access
Use the arrow keys to highlight the SPANNING TREE CONFIGURATION menu item on the
Spanning Tree Configuration Menu screen, and press ENTER. The Spanning Tree Configuration
screen, Figure7-3, di splays.
PVST PORT
CONFIGURATION
Used to allow Multiple Spanning Trees.
This screen displays when you select a port of interest on the Spanning
Tree Port Configuration screen. For details, refer to Section 7.5
CAUTION: This screen should be used only by personnel who are very knowledgeable
about Spanning Trees and how to develop them. Otherwise, the proper operation of the
network could be at risk.
Table 7-2 Spanning Tree Configuration Menu Screen Menu Item Descriptions (Continued)
Menu Item Screen Function