Quick VLAN Walkthrough

VLAN Operation and Network Applications 13-19

Figure 13-8 Walkthrough Stage Three, Port 10 Egress Setting

Configuring the Port Parameters

Now that the TEST VLAN and the trunk connection are set up, we can proceed to set the port

parameters for ports 3 and 10, as follows:

1. On the 802.1Q Configuration Menu screen, use the arrow keys to highlight the

VLAN PORT CONFIGURATION menu item and press ENTER. The VLAN Port

Configuration screen displays.

2. Use the arrow keys to highlight the PVID field for Port 3.

3. Type in 2, which is the VLAN ID of the Test VLAN. This will associate Port 3 with the

VLAN ID, thus making the port PVID of 2.

NOTE: Since Port 3 will connect to a single workstation, and is not to be used for

switch-to-switch communications, the acceptable frame types allowed through this port

will be all frame types (tagged and untagged). Since Port 3 will not receive VLAN frames

from the work station, it is not necessary to filter frames.

40461_84
RETURN
EXIT
Port Egress
---- ----------
1 [ NO ]
2 [ NO ]
3 [UNTAGGED ]
4 [ NO ]
5 [ NO ]
6 [ NO ]
7 [ NO ]
8 [ NO ]
SAVE
SET ALL PORTS: [UNTAGGED]
Port Egress
---- ----------
9 [ NO ]
10 [ TAGGED ]
11 [ NO ]
12 [ NO ]
13 [ NO ]
14 [ NO ]
15 [ NO ]
16 [ NO ]
Port Egress
---- ----------
17 [ NO ]
18 [ NO ]
19 [ NO ]
20 [ NO ]
21 [ NO ]
22 [ NO ]
23 [ NO ]
24 [ NO ]
Port Egress
---- ----------
25 [ NO ]
26 [ NO ]
27 [ NO ]
VLAN ID: 2 FDB ID: 2 VLAN NAME: Test