Installing the Automatic Document Feeder
Because the automatic document feeder is heavy, you may want to have someone help you with this procedure. Also, the document feeder is large, so be sure to have adequate space around the scanner.
Follow the steps below to install the automatic document feeder on your scanner:
1.Make sure your scanner is turned off and unplug the cables.
2. Remove your scanner’s document cover by grasping the back of the cover as shown and easing the cover up.
3. Remove the document guide strip from the document table.
4. Attach the two feet as shown.
5.Insert the installation screws that came with the ADF into the
holes in the back of the scanner and secure them with the enclosed screwdriver tool, as shown.
115