9.Attach the ADF’s connector to the scanner’s option (ADF/TPU) interface. Secure the connection by tightening the connector screws.
10.Peel the backing from the stopper and from the paper out support provided with the ADF. Then attach the stopper and paper out support to the scanner as shown. Insert the tabs on the paper out support into the slots at the right end of the document table.
stopper
paper out support
There are two stoppers included with the ADF, a light gray one and a dark gray one. Use the light gray stopper, not the dark gray stopper.
11. Close the ADF.
If you haven’t connected the scanner to your computer, continue with “Connecting the Scanner to Your Computer” on page 18.
117