5.Place the 35 mm filmstrip guide on the document table, and align it with the notch on

the transparency guide as shown.

6. Close the TPU and begin scanning.

Make sure to select TPU for Neg. Film or TPU for Pos. Film as your Document Source in EPSON TWAIN Pro.

If a color stripe appears when scanning film (known as “Newton’s ring”), try scanning the film upside down.

Loading 35 mm slides

Follow these steps to load 35 mm slides:

1. Load slides in the 35 mm slide holder as shown. Make sure the glossy side of each slide faces down, and the film emulsion layer faces up.

2.Position the slide holder on the document table. Align the slide holder with the notch on

the transparency guide as shown.

3. Close the TPU and begin your scan.

If you’re using

EPSON TWAIN Pro to scan, make sure to select TPU Pos as your document source.

109