IEEE 1394 FireWire Scanner Interface Card
To use the IEEE 1394 FireWire scanner interface card (B808342), your Power Macintosh must be running Macintosh OS 8.6 or later with FireWire Update 2.1 or later. Your PC must have an OHCI compliant FireWall port or card, and must be running a
When you install the scanner
software, FireWire Update 2.1 will automatically be installed or updated, if it’s not already on your Macintosh or if you have an older version.
This section explains how to install the IEEE 1394 FireWire scanner interface card in your scanner, and how to connect the scanner to your computer.
Installing the Card in Your Scanner
Before you begin, turn off the scanner and disconnect the power cord and any cables.
1. Remove the two screws securing the shield plate to the scanner’s optional interface slot, and then remove the plate. Put the screws in a safe place in case you want to reinstall the shield plate later.
Static electricity can damage electronic components like the IEEE 1394 FireWire scanner interface card. To discharge static electricity, touch the scanner’s metal frame before handling the card.
122