Testing Your Scanner’s Operation

To make sure your scanner is working properly, it’s a good idea to turn it on before you connect it to your computer.

The scanner’s voltage cannot be changed. If the label on the back of the scanner does not display the correct voltage for your area, contact your dealer. Do not plug in the power cord.

1.Make sure the scanner is plugged in. Then open the scanner’s document cover so you can see the operation of the carriage.

2.Press the P OPERATE button to turn the scanner on.

The READY light on the scanner’s front panel flashes, and the scanner’s carriage moves forward, then back. The READY light stays on when the scanner is ready to scan.

P OPERATE

 

button

ERROR light

OPERATE light

READY light

RESET button

If you turn off the scanner, wait at least 10 seconds before turning it back on. Rapidly turning the scanner on and off can damage the scanner.

17