Loading 4 × 5-inch film

Follow these steps to load 4 × 5-inch film:

1. Place the 4 × 5-inch film guide on a flat surface and remove the cover from one of the film holders.

2. Insert the film in the film holder, making sure the glossy (smooth) side of the film faces down and the film emulsion layer faces up. Then close the cover.

3.Repeat steps 1 and 2 for all the film you scan.

4.Place the 4 × 5-inch film guide on the document table. Align it

with the notch on the transparency guide as shown.

5. Close the TPU and begin your scan.

If you’re using

EPSON TWAIN Pro to scan, make sure to select TPU Neg or TPU Pos as your document source.

110