Calculating the Adjustment Angle

If you need to adjust the document guide angle, you first need to determine which way to adjust it and by how much. For example, in the example shown above:

The adjusting angle = (scale A - scale B) / 4

For example:

If scale A starts at line 0, then 0 × 0.4 = 0; the value for scale A = 0

If scale B starts at line 2, then 2 × 0.4 = 0.8; the value for scale B = 0.8

(0 - 0.8)/4 = -0.2

In this example, the angle you need to adjust the adjust pin is -0.2

To adjust the angle:

1.Use a screwdriver to turn the adjust pin to the number you calculated (-0.2 in the

previous example).

2. To confirm the angle, repeat the steps under “Scanning with the Document Guide.” Once you’ve confirmed the angle, it’s a good idea to write it down for future reference.

68