3. Place your document face down on the document table and close the transparency unit.

4. Scan your document.

To remove the reflective document mat, slide it up and out of the slots on the transparency unit.

Adjusting the Transparency Guide Scanning Angle

If your scanned image’s edges are at a slight angle, adjust the scanning angle by turning the adjust pin. The direction and degree you adjust the angle depends on your individual scanner and the placement of the document to be scanned. You may want to experiment with this feature to determine the best angle. If you are still unsatisfied, see “Using the Document Guide” on page 64 for information on how to find the angle you need.

113