Be sure to remove the protective film from both the grid document guide and clear document guide before using them.
1. Lay the clear document guide on the scanner document table with the document guide holes over the scanner screw holes. Make sure the larger document guide hole is on the left side.
2.Place your document face up on the clear document guide.
3. Place the grid document guide on top of your document, aligning the document guide holes over the scanner screw holes.
Make sure the larger document guide hole is on the left.
4. Make sure your document is aligned with |
|
the grid document guide. After aligning the |
|
document to the proper position, use tape to |
|
secure it in place. Repeat this step for every |
|
document you want to scan, placing one |
|
document next to another (do not overlap | 69 |
them). |