EPSON AcuLaser C3800 User's Guide
Memory | 8 MB | 16 MB |
|
|
|
For Macintosh
Any Macintosh computer to which the printer is connected must be running Mac OS 9 ver. 9.1 or later, or Mac OS X ver. 10.2.8 or later. See the following table for details.
Note:
To use the PostScript 3 printer driver with a USB interface, your computer must be Macintosh OSX 10.3.9 or later.
Mac OS X
| Minimum | Recommended |
|
|
|
Computer | Power Mac G3, G4, G5, iMac, eMac, PowerBook G3, G4, or iBook | |
|
|
|
Hard Disk | — |
|
|
|
|
Memory | 128 MB |
|
|
|
|
Note:
To use binary data, Epson recommends that you use AppleTalk for the printer’s network connection. If you use a protocol other than AppleTalk for the network connection, you need to set Binary to On in the PS3 Menu on the control panel. If you use the printer with a local connection, you cannot use binary data.
Mac OS 9
| Minimum | Recommended |
|
|
|
Computer | Power PC |
|
|
|
|
Hard Disk | 3.1 MB free (for driver installation) | 4 MB free (for driver installation) |
|
|
|
Memory | 4 MB | 32 MB |
|
|
|
Note:
To use binary data, Epson recommends that you use AppleTalk for the printer’s network connection. If you use a local connection or a protocol other than AppleTalk for the network connection, you cannot use binary data.
cCaution:
❏The Adobe PostScript 3 printer driver cannot be used on computers running System 9.0.x or below.
❏The Adobe PostScript 3 printer driver cannot be used on Macintosh 68K computers.
Using the PostScript Printer Driver 151