EPSON AcuLaser C3800 User's Guide

When loading labels, you should make paper settings as shown below:

❏Make settings on the Basic Settings in the printer driver.

Paper Size:

A4 or LT

Paper Source: MP Tray (up to 15 mm thick stack)

Paper Type:

Labels

❏You can also make these settings on the Tray Menu in the control panel. See "Tray Menu" on page 172.

Note:

❏You should only use labels designed for laser printers or plain-paper copiers.

❏To prevent the label adhesive from coming into contact with printer parts, always use labels that completely cover the backing sheet, with no gaps between the individual labels.

❏Press a sheet of paper on top of each sheet of labels. If the paper sticks, do not use those labels in your printer.

❏You may have to make the setting Thick* for Paper Type in the Setup Menu.

*When using especially thick labels, set Paper Type to ExtraThk.

Thick paper and extra thick paper

You can load thick paper (106 to 163 g/m²) or extra thick paper (164 to 216 g/m²) into the MP tray.

When loading thick or extra thick paper, you should make paper settings as shown below:

❏Duplex printing is not available for extra thick paper.

❏Make settings on the Basic Settings in the printer driver.

Paper Size: A4, A5, B5, LT, HLT, EXE, GLT

Paper Source: MP Tray (up to 15 mm thick stack)

Paper Type: Thick, Thick (Back), or Extra Thick

❏You can also make these settings on the Tray Menu in the control panel. See "Tray Menu" on page 172.

Paper Handling 44