EPSON AcuLaser C3800 User's Guide

Chapter 10

Replacing Consumable Products

Replacement Messages

If a consumable product reaches the end of its service life, the printer stops printing and displays the following messages on the LCD panel or the window of EPSON Status Monitor. When this happens, replace the depleted consumable products.

LCD Panel Message

Description

 

 

Replace Toner uuuu*

The imaging cartridge for the indicated color has reached the

 

end of its service life.

 

 

Replace Fuser

The fuser unit has reached the end of its service life.

 

 

Replace Transfer Unit

The transfer unit has reached the end of its service life.

 

 

*The letters C, M, Y, or K appear in this position, indicating the color of the toner to be replaced. For example, the message Yellow Toner Low means that the amount of toner remaining in the yellow imaging cartridge is low.

Note:

Messages appear for one consumable product at a time. After replacing a consumable product, check the LCD panel for replacement messages for other consumable products.

Imaging Cartridge

Handling precautions

Always observe the following handling precautions when replacing the consumable products:

❏Installing a genuine imaging cartridge is recommended. Using a non-genuine imaging cartridge may affect print quality. Epson shall not be liable for any damages or problems arising from the use of consumable products not manufactured or approved by Epson.

❏When handling imaging cartridge, always place them on a clean smooth surface.

❏If you have moved an imaging cartridge from a cool to a warm environment, wait for at least one hour before installing it to prevent damage from condensation.

Replacing Consumable Products 228