EPSON AcuLaser C3800 User's Guide

Manual Duplex

One side for the manual duplex printing is finished. To start printing on the other side, set the paper and press the N Start/Stop button. See "Printing with the Duplex Unit (models with Duplex Unit only)" on page 51 for windows, or "Printing with the Duplex Unit (models with Duplex Unit only)" on page 128 for Macintosh.

Manual Feed ssss

The manual feed mode is specified for the current print job. Make sure the paper size indicated by ssss is loaded, then press the N Start/Stop button.

Mem Overflow

The printer has insufficient memory to execute the current task. Press the N Start/Stop button on the control panel to resume printing, or press the + Cancel Job button to cancel the print job.

Menus Locked

This message appears if you try to change the printer’s settings through the control panel when the buttons are locked. You can unlock them by the Password Config menu or by using the Network utility. Refer to "Password Config Menu" on page 185 or the Network Guide for information.

Need Memory

The printer has insufficient memory to complete the current print job.

To clear this error message, select Clear Warning from the control panel’s Reset Menu. See"How to access the control panel menus" on page 165 for instructions.

To prevent this problem from happening again, add more memory to your printer as described in "Memory modules" on page 296, or reduce the resolution of the image to be printed.

NonGenuine TonerCart

The installed imaging cartridge is not an genuine Epson product. Installing a genuine imaging cartridge is recommended. The printout and remaining amount of each imaging cartridge displayed on the control panel may be different from those when using genuine EPSON imaging cartridges. Epson shall not be liable for any damages or problems arising from the use of consumable products not manufactured or approved by Epson.

Install a genuine Epson product, or Clear All Warnings of the Reset Menu on the control panel to clear the warning message. See "Imaging Cartridge" on page 228 for instructions on replacing the imaging cartridge.

Using the Control Panel 197