EPSON AcuLaser C3800 User's Guide
Chapter 7
Using the PCL6/PCL5 Printer Driver
About the PCL Mode
Hardware requirements
Your printer must meet the following hardware requirements to be able to use the PCL6/PCL5 printer driver.
Memory requirements for using the PCL6/PCL5 printer driver are shown below. Install optional memory modules into your printer if the amount of memory currently installed does not meet your printing needs.
Minimum memory | Recommended memory |
|
|
128 MB* (for a simple print job at 600 dpi) | 256 MB* or more |
|
|
*Printing may not be possible with this amount of memory, depending on the specifics of the job being printed.
System requirements
Your computer must meet the following system requirements to be able to use the PCL6/PCL5 printer driver.
To use the PCL6/PCL5 printer driver, your computer must be running Microsoft Windows XP or have installed the 2000 Service Pack 3 or later.
For Windows XP or 2000
| Minimum | Recommended |
|
|
|
Computer | IBM PC series or IBM compatible with | IBM PC series or IBM compatible with |
| Pentium or higher CPU | Pentium II or higher CPU |
|
|
|
Hard Disk |
| |
|
|
|
Memory | 128 MB (256 MB for Server 2003) | 256 MB |
|
|
|
Display | Super VGA supporting 640 ⋅ 480 | Super VGA supporting 800 ⋅ 600 or |
|
| more |
|
|
|
Using the PCL6/PCL5 Printer Driver 163