EPSON AcuLaser C3800 User's Guide

Quick Print Job Menu

This menu allows you to print or delete print jobs that were stored in the printer’s memory using the Quick Print Job feature (Re-Print Job and Verify Job) of the printer driver’s Reserve Job function. For instructions on using this menu, see "Using the Quick Print Job Menu" on page 203.

Confidential Job Menu

This menu allows you to print or delete print jobs stored in the printer’s memory using the Confidential Job feature of the printer driver’s Reserve Job function. You need to enter the correct password to access this data. For instructions on using this menu, see "Using the Confidential Job Menu" on page 204.

USB Menu

These settings control communication between the printer and the computer when using the USB interface.

Item

Settings (default in bold)

 

 

USB I/F*1

On, Off

USB Speed*1*2

HS, FS

Get IP Address*2*3

Panel, Auto, PING

IP*3*4*5

0.0.0.0 to 255.255.255.255

SM*3

0.0.0.0 to 255.255.255.255

GW*3

0.0.0.0 to 255.255.255.255

NetWare*3

On, Off

AppleTalk*3

On, Off

MS Network*3

On, Off

Bonjour*3

On, Off

USB Ext I/F Init*2*3

-

Buffer Size*1*2

Normal, Maximum, Minimum

*1 After this item is changed, the setting value takes effect after a warm boot or after the power is turned on again. While it is reflected in the Status Sheet and EJL read-back, the actual change takes effect after a warm boot or after the power is turned on again.

*2 Available only when USB I/F is set to On.

*3 Available only when a USB external device with D4 support is connected. The contents of the settings depend on the USB external device settings.

*4 If the Get IPAddress setting is set to Auto, this setting cannot be changed.

Using the Control Panel 180