EPSON AcuLaser C3800 User's Guide

Misalignment of colors

Cause

What to do

 

 

The registration position of each color may

Adjust the color registration alignment. See

have shifted while the printer was being

"Adjusting Color Registration" on page 206 for

shipped or moved to a new location.

instructions.

 

 

Graphics do not print correctly

Cause

What to do

 

 

The printer emulation setting in your

Make sure that your application is set for the printer

application may be incorrect.

emulation you are using. For example, if you are

 

using the ESC/Page mode, make sure that your

 

application is set to use an ESC/Page printer.

 

 

You may need more memory.

Graphics require large amounts of memory. Install an

 

appropriate memory module. See "Memory Module"

 

on page 220.

 

 

Transparencies are output blank from the MP tray

When there are errors while printing on transparencies, the Check Transparency error message is displayed on the LCD panel.

Remove the transparencies from the MP tray. Open and close the front cover. Confirm the paper type and size, and then load the correct type of transparencies.

Note:

❏When using transparencies, load them in the MP tray and set the Paper Type setting to Transparency in the printer driver.

❏When the Paper Type setting in the printer driver is set to Transparency, do not load any other type of paper except transparencies.

Troubleshooting 262