EPSON AcuLaser C3800 User's Guide

*5 When the Get IPAddress setting is changed from Panel or PING to Auto, the panel setting values are saved. When Auto is changed to Panel or PING, the saved setting values are displayed. 192.168.192.168 if the settings are not made from the panel.

USB I/F

Allows you to activate or deactivate the USB interface.

USB SPEED

Allows you to select the operation mode of USB interface. Selecting HS is recommended. Select FS if HS does not work on your computer system.

Buffer Size

Determines the amount of memory to be used for receiving data and printing data. If Maximum is selected, more memory is allocated for receiving data. If set to Minimum is selected, more memory is allocated for printing data.

Note:

❏To activate Buffer Size settings, you must turn off the printer for more than five seconds then turn it back on. Or, you can perform a Reset All operation, as explained in "Reset Menu" on page 179.

❏Resetting the printer erases all print jobs. Make sure the Ready light is not flashing when you reset the printer.

Network Menu

See the Network Guide for each setting.

AUX Menu

See the Network Guide for each setting.

USB Host Menu

This menu allows you to use the USB Host printing function. For instructions on using the function, see "Printing Directly from a USB Memory" on page 206.

Item

Settings (default in bold)

 

 

USB Host*1

On, Off

Device Detection*2

Manual, Auto

Using the Control Panel 181