EPSON AcuLaser C3800 User's Guide
Cause | What to do |
|
|
You may use the printer fonts substituted for | In the printer driver, choose the Print TrueType fonts |
specified TrueType fonts. | as bitmap button in the Extended Settings dialog |
| box. |
|
|
The selected font is not supported by your | Make sure that you have installed the correct font. |
printer. | See the Font Guide for more information. |
|
|
Cause | What to do |
|
|
The interface cable may not be plugged in | Make sure that both ends of the interface cable are |
securely. | plugged in securely. |
|
|
You may not be using the correct interface | If you are using the USB interface, use a Revision 2.0 |
cable. | cable. |
|
|
The emulation setting for the port may not be | Specify the emulation mode by using the printer’s |
correct. | control panel menus. See "Emulation Menu" on page |
| |
|
|
Note:
If a status sheet does not print correctly, your printer may be damaged. Contact your dealer or a qualified service representative.
The printout position is not correctCause | What to do |
|
|
The page length and margins may be set | Make sure that you are using the correct page |
incorrectly in your application. | length and margin settings in your application. |
|
|
The Paper Size setting may be incorrect. | Make sure the correct paper size is set in the Tray |
| Menu on the control panel. |
|
|
MP Tray Size setting may be incorrect. | When loading paper for which the size is not |
| specified with Auto setting, specify the correct |
| paper size on the MP Tray Size setting in the Tray |
| Menu on the control panel. |
|
|
Troubleshooting 261