EPSON AcuLaser C3800 User's Guide

Ready

The printer is ready to receive data and print.

In this mode, the remaining amount of the imaging cartridge for each color is displayed in seven levels.

Replace Fuser

The fuser has reached the end of its service life and needs to be replaced.

Turn the printer off and wait for 30 minutes, then replace the fuser unit with a new one. See "Fuser Unit" on page 233 for instructions.

Replace Toner uuuu

The indicated imaging cartridges have reached the end of its service life and need to be replaced. (The letters C, M, Y, or K appear in place of uuuu and indicate the colors Cyan, Magenta, Yellow, and Black respectively.)

When the error light turns on, you cannot continue printing. Replace the imaging cartridge with a new one. See "Imaging Cartridge" on page 228 for instructions.

When the error light is blinking, you can continue printing in the black and white mode by pressing the N Start/Stop button, or you can cancel the print job by pressing the + Cancel Job button.

Replace Transfer Unit

The transfer unit has reached the end of its service life and needs to be replaced.

When the error light turns on, you cannot continue printing. Turn off the printer, then replace the transfer unit with a new one. See "Transfer Unit" on page 238 for instructions. The error clears automatically after you replace the unit and close all printer covers.

Reserve Job Canceled

The printer cannot store the data of your print job using the Reserve Job function. The maximum number of print jobs stored on the printer’s memory has been reached, or the memory has no more memory available to store a new job. To store a new print job, delete a previously stored job. Also, if you have any Confidential Jobs stored, printing those jobs will make more memory available.

You may also increase the available memory space by changing the RAM Disk setting to Normal or Maximum. For details, see "Setup Menu" on page 175.

To clear this error, select Clear Warning from the control panel’s Reset Menu. For instruction about accessing the control panel menus, see "How to access the control panel menus" on page 165.

Using the Control Panel 200