EPSON AcuLaser C3800 User's Guide

❏When removing the imaging cartridge, do not expose it to sunlight at all and avoid exposing it to room light for more than five minutes. The imaging cartridge contains a light-sensitive drum that is purple. Exposure to light can damage the drum, causing dark or light areas to appear on the printed page and reducing the service life of the drum. If you need to keep the imaging cartridge out of the printer for long periods, cover it with an opaque cloth.

❏Be careful not to scratch the surface of the drum. When you remove the imaging cartridge from the printer, always place it on a clean, smooth surface. Avoid touching the drum, since oil from your skin can permanently damage its surface and affect print quality.

❏To get the best print quality, do not store the imaging cartridge in an area subject to direct sunlight, dust, salty air, or corrosive gases (such as ammonia). Avoid locations subject to extreme or rapid changes in temperature or humidity.

❏Be sure to keep consumable components out of the reach of children.

❏Do not leave jammed paper inside the printer. This can cause the printer to overheat.

❏Avoid sharing outlets with other appliances.

❏Use only an outlet that meets the power requirements of this printer.

Important Safety Instructions

Read all of the following instructions before operating your printer:

When choosing a place and power source for the printer

❏Place the printer near an electrical outlet where you can easily plug in and unplug the power cord.

❏Do not place the printer on an unstable surface.

❏Do not put your printer where the cord will be stepped on.

❏Slots and openings in the cabinet and the back or bottom are provided for ventilation. Do not block or cover them. Do not put the printer on a bed, sofa, rug, or other similar surface or in a built-in installation unless proper ventilation is provided.

❏All interface connectors for this printer are Non-LPS (non-limited power source).

Safety Instructions 15