Epson EPL-7000 Using the SUB CONFIG Option

Using the SUB CONFIG Option

The subconfiguration option is different for each printer mode. The function and submenus of the SUB CONFIG option for each mode is described below.

Once you set new settings with the SUB CONFIG option, each setting remains in effect until you change it again or turn off the printer. If you want a setting to remain in effect even when you turn the printer off and on, use the Level 1 SAVE MACRO option described on page 3-22.

HP emulation mode

When you are in L-JET2P emulation mode, the SUB CONFIG option includes two submenus:

FORM

SYMSET

Press to enter the SUB CONFIG option submenu.

0 through 128

Use the FORM option to set the number of lines for the selected paper size and orientation. The setting you choose also changes the line spacing. This setting is affected by P-SIZE, ORIENT and FONT settings. If 0 is selected, the line spacing changes to l/6-inch.

3-38 SelecType