SelecType Options

Print two different test patterns to check whether your printer is

working correctly. After TEST PRINT appears, press once to see the following display.

Press to print Pattern 1 (vertical lines) or press to

display Pattern 2 (horizontal lines); then press to print Pattern 2.

The channel configuration option allows you to choose settings for the MODE (operating mode), I/F (interface configuration), and RX-BUFFER (size of receive buffer) for each channel. You select the channel you are going to use. After CH CONFIG appears,

press to see the following display:

 

* P or S

 

Press

to select Channel I’. If you share the printer and want

to select Channel S, press

to display option S; then press

to select channel S. Once you select a channel, you enter the submenus of CH CONFIG option:

MODE i/F

RX-BUFFER

SelecType 3-25