Testing the Printer

Printing a status sheet

In addition to the test print patterns, you can print a status sheet that lists printer settings for your selected channel.

Note: The status sheet prints the printer’s current settings. If you change the macro number setting for the LOAD MACRO option in the SYSTEM CONFIG submenu, the status sheet prints out the new macro settings. MACRO 0 is the factory default setting.

Follow these steps to print the status sheet:

1.Make sure that your printer is plugged in and the power is on.

2.Press SelecType once to enter SelecType Level 1.

Note: If you have used SelecType before, and if the printer is set up to use both channels, the following option appears on the display:

Press

or

to choose your channel, then go on to step 3.

3.Hold down until STATUS SHEET appears on the display.

4.Press to print the status sheet.

Testing and Connecting Your Printer

2-13