Epson EPL-7000 2-12 Testing and Connecting Your Printer

Testing the Printer

Part of a typical pattern 1 test print is shown below:

After the page has been printed, the printer returns to the main menu and the display shows TEST PRINT.

If you want to print the second test print pattern, follow these additional steps:

4.Press I,( once; then change the test pattern number by

pressing or once to display the following:

5.Press I,( to print the second pattern.

After you print the test pattern, press SelecType once to exit SelecType mode.

If the test pattern prints correctly, you can skip to the section on connecting the printer to your computer later in this chapter. If the test print does not operate properly, see Chapter 7 for troubleshooting information.

2-12Testing and Connecting Your Printer