Selecting Channel and Mode

4. If you want to change the channel, press

or

. If you

do not, press

Then you move to a submenu, MODE. The

current setting for HP emulation mode is shown on the display:

5. Press to enter the MODE option. The icon appears to the left of the currently set printer mode as shown below.

6.You can choose either the L-JET2P, LQ, or FX mode. Press

either or until the mode you want to select appears on the display.

7.Press to set the new mode. The display returns to the main menu.

8.Press the SelecType button to exit SelecType.

This mode setting remains in effect until you change the setting again or turn off the printer. If you want this setting to remain in effect even after you turn the printer off and back on, use the P-CONFIG option to save the setting as described later in this chapter.

3-14 SelecType