Using Your Printer with Application Software

Once you’ve set up the printer and are more familiar with its operation, you can start using it with your application programs. Most application programs ask you to specify the type of printer you are using so that the program can take full advantage of the printer’s features. Many programs have an installation or setup menu that presents a list of printers to choose from.

If your program has a printer selection menu, follow the instructions below to get the best performance from your printer.

Using printer selection menus

Your printer has three printer operating modes, also called emulations. It is factory-set to the HP LaserJet series IIP emulation (L-JET2P) mode and this setting gives you the fullest range of features. If you choose another emulation mode with the SelecType Level 2 MODE option, make sure you also set up your software to match the emulation mode you want to use.

The following sections describe how to set up your application programs for each emulation mode.

5-2 Application Software