Using the SUB CONFIG Option

*OFF ON

You can use this option to change the character spacing. Condensed printing is useful for spreadsheets and other applications where you need to fit the maximum amount of information on each line. The 15 cpi character pitch cannot be condensed.

0 to available

This option allows you to set the left margin position. Margin units are determined by the current pitch (characters per inch) and the condensed setting (on or off). If you select proportional, 10 cpi and condensed are used to determine margin units. If you change the setting of ORIENT, P-SIZE, or WIDE PAGE (when P-SIZE is set to A4 or F4) the left margin defaults to 0. The factory setting is 0.

1 to available

This option allows you to set the right margin. Margin units are determined by current pitch (characters per inch) and the condensed setting (on or off). If proportional is selected, 10 cpi and condensed are used to determine margin units. The factory setting is 80. If you change the setting of ORIENT, P-SIZE, or WIDE PAGE (when P-SIZE is set to A4 or F4) the right margin defaults to the following settings:

3-42 SelecType