The Control Panel

messages. If the CONTINUE light is flashing, read the corresponding error or status message on the display and correct the problem as described in Chapter 7.

COPY END — Cancels the remaining copies during multiple-copy printing. This button is effective only when the printer is off line.

RESET — Cancels some settings made with SelecType or software commands. When you hold down this button for several seconds, ‘RESET appears on the display and all settings return to their previously saved values. The page being printed when this button is pressed is finished. However, all remaining data is discarded. If you

press o r , the printer returns to its

previous status without printing data.

If you continue to hold down this button after RESET appears, INITIALIZE appears on the display and the printer settings return to the power-on default settings.

S e l e c T y p eEnters or exits SelecType mode. Press once to enter Level 1; hold down to enter Level 2. When you enter each level, the corresponding indicator light goes on. For a complete description of SelecType, see Chapter 3.

Other control panel features

Data dumpHold down the SelecType button while you turn on printer to turn on data dump (or hex dump) mode. This feature allows advanced users to find the cause of communication problems between the computer and the printer. See Chapter 7.

Testing and Connecting Your Printer

2-5