Status and Error Messages

[E] START UP ERROR

If this message appears when you turn on the printer, the power may have been turned off while the printer was performing a save or reset operation. To clear this error, press

or RESET to return the printer settings to their defaults.[W] TONER LOW

The printer is almost out of toner. When you see this message, you can still print up to 25 more pages. The imaging cartridge must be replaced soon.

[E] TONER OUT

The imaging cartridge must be replaced. Replace the imaging cartridge as described in Chapter 6.

[E] TRAY SET AUTO XXX

The paper size setting does not match the paper loaded in the specified paper cassette. The right column of the display indicates the expected paper size and the currently selected cassette. You can either change the paper size setting or load the correct paper size. After you correct the paper mismatch, press CONTINUE.

[E] TRAY SET OPT XXX

The paper size setting does not match the paper loaded in the optional lower paper cassette. The right column of the display indicates the expected paper size. After you correct the paper mismatch, press CONTINUE.

[E] TRAY SET STD XXX

The paper size setting does not match the paper loaded in the standard paper cassette. The right column of the display indicates the expected paper size. After you correct the paper mismatch, press CONTINUE.

7-8 Troubleshooting