SelecType Options

CAUTION: Do not set this option unless you have installed optional memory as described in Appendix A. The printer has 0.5 MB RAM, however; you must have

0.6MB RAM to share the printer. If you set this option before adding memory, you could damage your printer.

This option specifies the proportion of memory for channel S and Channel P. The numbers at the right indicate the current available

memory. If you want to share the printer, press to display:

S 0:10P

S 1: 9P

S10: OP

The proportion of memory for each channel can be set from 10:0 to 0:10 by increments of 1. The factory settings is P10: OS. Press

or

to change the setting.

CAUTION: When you share the printer, each printer channel requires at least 0.3 Kbytes of RAM, the printer always needs some portion of RAM for general operation. If you use one memory chip set to increase the printer’s memory to 1.0 MB, your best setting would be

4:6 or 6:4.

3-32SelecType