Using the SUB CONFIG Option

1 to available

Use this option to set the page length. The unit of measure for this option is 1/6th of an inch. If you change the ORIENT, P-SIZE, or FORM TOP settings with SelecType, the form length setting automatically returns to the default setting for each paper size. The factory setting is 62 (line spacing 6 lines per inch).

*OFF ON

When SKIPBOTTOM is set to ON, the printer inserts the number of line spaces specified by the ESC N (skip over perforation) command between the last line printed on one page and the first printable line on the next page. The total number of lines skipped equals the FORM TOP setting plus the amount of skip over perforation set with ESC N. Since most application programs insert their own top and bottom margins, you should use this feature only if your program does not provide them.

*PcUSA PcMult PcPort PcCanF PcNord DLoad

ITALIC

3-44 SelecType