Options

ProblemSolution

Using the optional face-up output tray, the printer does not operate properly.

The paper does not feed onto the face-up tray.

The paper feeds but then jams at the output area.

You may not be using the correct paper for your printer. Make sure your paper matches the specifications listed in Chapter

8.If the finish of the paper is too smooth or too rough, paper feeding may be difficult. Try feeding each sheet manually from the standard paper cassette.

The thickness of the paper also affects paper feeding. Always test your paper before purchasing it in large quantities.

The feed roller may be dirty. Clean the roller as described in the maintenance section for the optional lower cassette in Appendix A.

The optional face-up output tray may not be installed properly. See Appendix A for information on installing the face-up output tray.

You may not have set the paper path correctly. Make sure that the paper path select lever is set in the FACE UP position as described in Chapter 4.

There may be too much paper in the output tray. Never let more than 100 sheets of paper accumulate in the face-up output tray.

Troubleshooting 7-45