Testing the Printer

6. Pull the paper set lever back to the automatic position.

Note: The paper set lever must be in the automatic position before paper can be fed automatically from the paper cassette. If you set the lever to the manual position when the printer is on, automatic paper feeding is disabled and the PAPER OUT message appears on the display, even if there is paper in the paper cassette.

Now you’re ready to turn on the printer and run a test print.

Turning on the printer

Make sure the printer is plugged in and the imaging cartridge is

installed; then turn on the power by pressing the vertical bar

on the power switch located at the back of the printer. All of the lights on the control panel light briefly at power on.

Testing and Connecting Your Printer

2-9