RESET).
The FontCartridges

 

 

 

 

Supplier

 

Cartridge number

Cartridge

 

 

 

 

lntercon

 

 

PHONT+

 

 

 

PRO II P

 

 

 

 

CAUTION: Use only the HP font cartridges listed above in your EPL-7000. You cannot use other HP font cartridges with this printer, or you may damage your printer.

You can use each font cartridge in only HP emulation mode. See the font card manual for information on the printer mode to use. To change the printer mode, use the SelecType Level 2 CH CONFIG option described in Chapter 3.

Inserting a font cartridge

Optional font cards are easy to use with your printer. You can insert a font cartridge into the slots at the left back of the printer. Follow these steps to insert a font cartridge:

CAUTIONS:

Never insert or remove a cartridge while the printer is on line, in SelecType mode, or while the printer is resetting (after you press

•Be careful when you insert or remove a font cartridge. You can damage the cartridge by trying to insert it the wrong way or by using too much force.

•Do not touch the connector on the bottom of the cartridge or the connector in the printer’s cartridge slots. You could damage the cartridge or printer.

1.If the CH P or CH S light is flashing, press FEED to print any data remaining in the buffer.

2.Take the printer off line or turn off the power.
A-4 Appendix A