Tear Off/Bin (two lights, green)

The printer uses the two Tear Off/Bin lights to indicate the
following:
f f The perforation of your continuous paper is at
the tear-off position.
o n The optional high-capacity cut-sheet feeder
(bin 1 of the double-bin feeder) is selected.
n o The optional second-bin cut-sheet feeder (bin 2
of the double-bin feeder) is selected.
n n Card mode is selected (for printing on postcards).
f = Flashing,
n = On,
o = Off
Buttons

Operate

Press this button to turn the printer on or off.

Pause

Press this button to temporarily stop printing, and press it again to
resume printing. To turn on the micro-adjust mode, stop printing
and hold down this button for at least 3 seconds. Press it again to
turn off the micro-adjust mode. See “Using Micro Adjust” in
Chapter 3 for details.

Load/Eject

Press this button to advance single-sheet or continuous paper to
the loading position. (The printer normally loads paper
automatically.) If a single sheet is already in the loading position,
press this button to eject it. If continuous paper is in the loading or
tear-off position, press this button to feed it backward to the
standby position.
LAdonis Rev.E
A5 size Chapter 4
97/04/07 pass 0
4-4 Using the Control Panel