6 The “Local port support” screen appears. Select the port driver to be installed and then click the [Next] button. For Serial or Ethernet interface, do not select any printer driver and click [Next] button.
Item
Description
Automatically install detected USB devices. | When this is checked, the Plug and Play function will |
| be enabled for the TM printer equipped with the USB |
| interface. If this is not checked, the printer driver |
| cannot be installed by the Plug and Play function. |
|
|
Launch StatusViewer on login. | When this is checked, the Status Viewer |
automatically starts to run when you login the | |
| computer. |
|
|
7
8
The “Printer Configuration” screen appears. When installing the printer driver as well as the APD, click the [Add] button.
The “Add Printer” screen appears. Configure the printer driver and port to use, and click the [Next] button.
Setting
Description
Select driver | Select the printer driver to be installed. | |
|
| |
Printer name | The printer driver name. This is changeable. | |
| Do not use | |
|
| |
Port Type | Select the type of interface to connect the computer and printer. | |
| Create a Parallel port: | Proceed to Step 9. |
| Create a Serial port: | Proceed to Step 10. |
| Create an Ethernet port: | Proceed to Step 11. |
| Create a USB port: | Proceed to Step 12. |
|
| |
Set as Default Printer | Check when configuring the printer as that normally used from the | |
| Windows applications. |
|
|
|
|
46
