When connecting Customer Display
to TM printer
This section explains how to install the APD when connecting a Customer Display to a TM printer. For the APD of version 4.07 or later, the printer drivers for both 32 bit and 64 bit version OS are installed.
Installation Flow
1.Installation when using
2.Connecting the devices (page 40)
3.Test print/display (page 41)
Installation when using pass-through connection
Serial
Serial
Modular
The pass‐through connection is a connection method to connect the computer and the TM printer via the Customer Display.
The serial interface must be used and the communication settings on each of the three devices must be the same. For information on DIP switch / Memory switch settings on the Customer Display and the TM printer, see the Userʹs Manual supplied with the TM printer or the Technical Reference Guide.
32
