Chapter 2 Installation and Setup 
9 The “Parallel Port Settings” screen appears. Configure the settings of the Parallel port and click the [Next] button. Proceed to Step 12.
Setting
Description
Printer name | The printer name you entered at Step 8 is displayed. This cannot be |
| changed. |
|
|
LPT Port | Specify the number of parallel port used for connecting the printer. |
| Usually, the port number is automatically displayed and no setting is |
| required. |
|
|
10 The “Serial Port Settings” screen appears. Configure the settings of the Serial port and click the [Next] button. Proceed to Step 12.
Setting
Description
Printer name | The printer name you entered at Step 8 is displayed. This cannot be |
|
| |
| changed. |
|
| |
|
|
|
| |
COM Port | Specify the number of serial port used for connecting the printer. |
|
| |
|
|
|
| |
Baud Rate | Specify the baud rate. |
|
| |
2 | ||||
|
|
| ||
Data Bits | Specify the data bits. |
| ||
|
| |||
|
|
|
| |
Stop Bits | Specify the stop bits. |
|
| |
| ||||
|
|
|
| |
Flow Control | Specify the method of data flow between the computer and the printer. |
|
| |
|
|
|
| |
Parity | Specify the parity. |
|
| |
|
|
|
|
11 The “Ethernet Settings” screen appears. Configure the IP Address of
the TM printer and click the [Next] button. Proceed to Step 12.
Setting
Description
Printer name | The printer name you entered at Step 8 is displayed. This cannot be |
| changed. |
|
|
IP address | Enter the printer IP address. |
| To find the information about IP Address of the TM printer, see the |
| Technical Reference Guide of each TM printer. |
|
|
12 The display returns to the “Printer Configuration” screen. All the printer drivers, configured between Step 8 to Step 11, appear in the list.
To install multiple printer drivers, repeat Step 7 to Step 11. To install the same printer driver multiple times, click the [Copy] button.
When the settings of the printer drivers are finished, click the [Next] button.
47
